Follow these easy steps to get your AEG FAVORIT 88070 VIL Dishwasher up and running in no time.

1. Check Electrical and Water Connections

Ensure that the electrical and water connections comply with the installation instructions.

2. Remove All Packaging

Remove all packaging from inside and outside the appliance.

3. Positioning the Dishwasher

If possible, position the machine next to a water tap and a drain. Ensure that the water inlet hose, the drain hose, and the supply cable are not kinked or squashed.

4. Levelling the Dishwasher

Adjust the feet to level the dishwasher horizontally and vertically to ensure the correct closure and sealing of the door.

5. Secure the Dishwasher

Fix the dishwasher to the adjacent units to prevent tilting.

6. Set the Water Softener

Set the water softener to remove minerals and salts from the water supply according to the hardness of your local area water.

7. Fill Salt Container

Pour 1 litre of water inside the salt container and then fill it with salt.

8. Fill Rinse Aid Dispenser

Fill the rinse aid dispenser to ensure proper cleaning and drying results.

9. Check Spray Arms

Check that the baskets have been loaded correctly and that the spray arms can rotate freely.

10. Turn on Water Supply

Turn on the water tap to supply water to the dishwasher.

11. Power On the Dishwasher

Press the On/Off push button to switch on the dishwasher.

12. Select Language

The first time the dishwasher is switched on, select the desired language for the display messages.

Back to Home

AEG FAVORIT 88070 VIL

;